Author Topic: Adding Cleats any brand recommended  (Read 1931 times)

Offline kaelc

  • Deckhand
  • **
  • Posts: 14
Adding Cleats any brand recommended
« on: June 09, 2017, 06:11:33 AM »
Has anyone added cleats to their Tolman after it was finished? I pull a halibut anchor using a buoy system and it can produce a lot of stain on my aluminum boat, any recommendations on a good cleat that comes with a good backing plate and mounting hardware? Thanks

https://www.youtube.com/watch?v=SiYYQZ6Gzl4

https://halibutchronicles.com/2014/05/11/how-to-anchor-for-halibut/

Offline Dave Wright

  • First Mate
  • *******
  • Posts: 1111
Re: Adding Cleats any brand recommended
« Reply #1 on: June 09, 2017, 07:52:04 AM »
Just be sure to get a cleat with four mounting holes rather than two. Somewhere or other I have pictures of a big steel two hole cleat on a dock, hitched to a smaller four hole cleat on a boat. After one stormy night the big two hole cleat had bent its mounting bolts over. The four hole cleat showed no movement or damage

Offline Cannon

  • Captain
  • *********
  • Posts: 2062
  • Salem Oregon
    • NW Outdoor Writer
    • Email
Adding Cleats any brand recommended
« Reply #2 on: June 10, 2017, 06:46:14 PM »
I bought seven off of EBay solid cast Stainless Steel. They had/have two threaded rods protruding from the base. They came with nylock nuts and a large backing plate. Very solid! I wasn't trusting the ones mounted with screws, and wanted them to withstand abuse.
I just added two more at the front of the cuddy on either side. The studs were not long enough so I unscrewed the threaded rods and used Stainless bolts to attach them. Worked great, very solid.


Sent from my iPhone using Tapatalk
« Last Edit: June 10, 2017, 06:50:19 PM by Cannon »
Great Alaskan 28' started June 2015, launched August 2016
Remember, the ark was built by amateurs; while the Titanic was built by professionals.