Finished glassing the bow cover, gunnels and spray rails...and troweling a bit of fairing compound to help the final appearance. I took to a strategy of laying up the glass and not adding subsequent coats of epoxy by roll or brush to "fill the weave". Rather I just troweled on a faring compound when the glass was still a bit soft-ish/green. I feel that troweling on fills the weave more directly/effectively and a lot faster. I think sometimes just coating it will just add layers of epoxy shells to the same fiberglass texture vs. filling in the texture - especially for biax tape.
Just have to glass the top of the side boxes/trays etc. The next time you see a post it will be painted.
